|
Kilz Premium Ltx Primer Qt
A superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stain blocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating. High hide formula / blocks previous colors and medium stains. Seals surfaces for uniform finish. Stains: Water, tannin, ink, pencil, felt-marker and grease. Use on: Wood, non ferrous metals, cured plaster, wallpaper, masonry, concrete block/CMU, Vinyl/PVC, fiberglass, and under or over latex or oil based paint.
View Details
|
798800 |
Kilz Premium Ltx Primer Qt |
6 |
17.49 |
/ QT |
13002 |
|
|
Kilz Premium Ltx Primer Gal.
A superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stain blocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating. High hide formula / blocks previous colors and medium stains. Seals surfaces for uniform finish. Stains: Water, tannin, ink, pencil, felt-marker and grease. Use on: Wood, non ferrous metals, cured plaster, wallpaper, masonry, concrete block/CMU, Vinyl/PVC, fiberglass, and under or over latex or oil based paint.
View Details
|
798819 |
Kilz Premium Ltx Primer Gal. |
7 |
34.99 |
/ GL |
13041 |
|
|
Kilz 2 Int/ex Ltx Primer
A fast drying, water-base multi-surface primer-sealer-stain blocker with excellent adhesion, sealing properties and very mild odor. KILZ 2 latex primer also blocks most light stains and provides a mildew resistant coating. Hides previous colors well. Good adhesion and sealer. Stains: water, rust, grease, ink, pencil and felt marker. Use on: Interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick, architectural plastics, and non ferrous metals.
View Details
|
780758 |
Kilz 2 Int/ex Ltx Primer |
6 |
13.99 |
/ QT |
20002 |
|
|
Kilz 2 Int/ex Ltx Primer
A fast drying, water-base multi-surface primer-sealer-stain blocker with excellent adhesion, sealing properties and very mild odor. KILZ 2 latex primer also blocks most light stains and provides a mildew resistant coating. Hides previous colors well. Good adhesion and sealer. Stains: water, rust, grease, ink, pencil and felt marker. Use on: Interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick, architectural plastics, and non ferrous metals.
View Details
|
780731 |
Kilz 2 Int/ex Ltx Primer |
8 |
25.99 |
/ GL |
20041 |
|
|
Natural Oak Wood Putty
An easy-to-use, non-hardening wood putty ideal for filling small holes and minor defects in interior wood surfaces after assembly and finishing. Recommended for filling and hiding countersunk nail holes, gouges, scratches, and miter joints. Colors can be blended for custom color matching. Available in 12 popular wood tones to match most finished wood surfaces. 3.7 Oz. Container. For Interior use only.
View Details
|
782317 |
Natural Oak Wood Putty |
Please Call for Availability |
5.99 |
/ EA |
21276 |
|
|
16oz Plastic Wood Slvnt Natural
A high-performance, solvent-based wood filler that hardens to give a repair that is 3X stronger than the wood itself, when compared to white pine. This professional-grade, heavy duty wood filler contains real wood fibers so it looks and acts like real wood. It can be sanded, cut, drilled, screwed, planed, stained, varnished, painted, or lacquered. It provides strong nail and screw anchoring without splitting. DAP Plastic Wood Professional Wood Filler dries fast and hard, and is shrink and crack resistant. For use on furniture, doors, paneling, molding, plywood, and other wood surfaces. Available in several popular wood shades, this high-performance wood filler can also be stained to match any wood shade. For interior/exterior use.
View Details
|
791771 |
16oz Plastic Wood Slvnt Natural |
5 |
17.99 |
/ PT |
21506 |
|
|
Clr Natural Look Sealer
Just like natural and man-made stone, concrete, stucco and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. Specially formulated DRYLOK® Natural Look Sealer soaks right in and provides an invisible coat of protection that looks beautiful and natural. Use on interior and exterior masonry surfaces, including concrete driveways, basement floors, garage floors, concrete sidewalks, patios, terrazzo, brick, and slate. DRYLOK® Natural Look Sealer protects exterior masonry surfaces, minimizing concrete dusting, cracking, and pock-marking. Water base, one-coat sealer. Ideal masonry primer. Hardens concrete.
View Details
|
795224 |
Clr Natural Look Sealer |
1 |
37.99 |
/ GL |
22113 |
|
|
1lb Sand Txture Additive
A sand finish paint additive that can be added to any interior or exterior paint to create a light, decorative texture to walls and ceilings. Easily applied with a brush or roller. Add any amount to produce the desired texture. See Skid-Tex for a skid-resistant paint additive. 1 lb.
View Details
|
792276 |
1lb Sand Txture Additive |
Please Call for Availability |
6.99 |
/ EA |
22616 |
|
|
White Latex Waterproofer
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
View Details
|
772961 |
White Latex Waterproofer |
2 |
36.99 |
/ GL |
27513 |
|
|
Drylok Waterproof Paint
Drylok Extreme Masonry Waterproofer Concrete Sealer
Drylok Extreme is the next generation in waterproof coatings. This smoother waterproof paint is perfect for the most demanding conditions. Fully transferable 15 year warranty. Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco, and brick. Ceramic fortified for the ultimate in waterproof protection. Specially formulated to resist mildew growth, with the incorporation of a nonhazardous green biocide, on the paint film. Stops 12 P.S.I., that's greater than a wall of water 26 ft. high. Tested to ASTM D-7088 resistance to hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. recommended use: Interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, stucco, and brick. Clean up with soap and water. Coverage: 75 to 100 sq. ft. per gallon. Tintable with 50% of color formula. Not to exceed 2 fl. oz. of colorant per gallon.
An EnviroLINK Product: This product meets the standards for energy efficiency and reduced impact on the environment.
View Details
|
784910 |
Drylok Waterproof Paint |
2 |
46.99 |
/ GL |
28613 |
|
|
Neutral Latex Wood Patch
A ready-to-use latex patching compound containing treated pulverized wood. Excellent for many uses because it shrinks less, and may be nailed, sawed, sanded, or drilled. May be topcoated with paint, varnish, shellac, polyurethane, stain, and can be used indoors or outdoors. When a patched area requires stain, Zar wood patch greatly diminishes the lighter area or halo effect surrounding the patch. Fills and repairs cracks and holes in toys, patterns, furniture, picture frames, and most items made from wood. Makes inlays, models, novelties, and carved objects. May be reduced with water to obtain a creamy consistency when using as wood grain filler. Follow label instructions for surface preparation and application. Allow to dry overnight. Sand lightly and topcoat with latex paint, wood stain, or polyurethane. All exterior applications must be topcoated. Clean up tools with soap and water.
View Details
|
799218 |
Neutral Latex Wood Patch |
4 |
19.99 |
/ QT |
30912 |
|
|
Red Oak Latex Wood Patch
A ready-to-use latex patching compound containing treated pulverized wood. Excellent for many uses because it shrinks less, and may be nailed, sawed, sanded, or drilled. May be topcoated with paint, varnish, shellac, polyurethane, stain, and can be used indoors or outdoors. When a patched area requires stain, Zar wood patch greatly diminishes the lighter area or halo effect surrounding the patch. Fills and repairs cracks and holes in toys, patterns, furniture, picture frames, and most items made from wood. Makes inlays, models, novelties, and carved objects. May be reduced with water to obtain a creamy consistency when using as wood grain filler. Follow label instructions for surface preparation and application. Allow to dry overnight. Sand lightly and topcoat with latex paint, wood stain, or polyurethane. All exterior applications must be topcoated. Clean up tools with soap and water.
View Details
|
799225 |
Red Oak Latex Wood Patch |
4 |
6.99 |
/ EA |
31041 |
|
|
Golden Oak Danish Oil
A penetrating oil finish for wood that won't crack, chip, or peel. Stains and protects in 1 easy step. Produces a natural hand rubbed appearance that is resistant to water and alcohol. May be topcoated, if desired, with Varathane Liquid Plastic or Elite Diamond Finish after 72 hours. Watco Danish Oil Finish is the choice of many master craftsmen, but is easy-to-use and produces professional results for the DIY as well. Best applied with a soft cloth, but may also be applied with a brush or synthetic steel wool. Excellent for use on furniture, cabinets, doors, trim, and paneling. Covers 55 to 75 Sq. Ft. per quart. Finished surfaces are ready for use 8 to 10 hours after application. Clean up with paint thinner or mineral spirits. Not recommended for floors.
View Details
|
788892 |
Golden Oak Danish Oil |
2 |
22.99 |
/ QT |
65141 |
|
|
Light Walnut Danish Oil
A penetrating oil finish for wood that won't crack, chip, or peel. Stains and protects in 1 easy step. Produces a natural hand rubbed appearance that is resistant to water and alcohol. May be topcoated, if desired, with Varathane Liquid Plastic or Elite Diamond Finish after 72 hours. Watco Danish Oil Finish is the choice of many master craftsmen, but is easy-to-use and produces professional results for the DIY as well. Best applied with a soft cloth, but may also be applied with a brush or synthetic steel wool. Excellent for use on furniture, cabinets, doors, trim, and paneling. Covers 55 to 75 Sq. Ft. per quart. Finished surfaces are ready for use 8 to 10 hours after application. Clean up with paint thinner or mineral spirits. Not recommended for floors.
View Details
|
789034 |
Light Walnut Danish Oil |
3 |
22.99 |
/ QT |
65541 |
|
|
Pc11 1oz Epoxy Wht Paste Syrin
PC 11 All Purpose Marine Epoxy
*Sub Brand: Marine All Purpose
*Adhesion Strength: High Strength
*Product Type: Epoxy
*Container Size: 1 oz.
*Recommended Surface: Most Surfaces
*Product Form: Paste
*Indoor or Outdoor: Indoor and Outdoor
*Solvent Resistant: Yes
*Color: Off White
*Packaging Type: Carded
*Working Time: 40
*Flammable: No
*UV Resistant: Yes
*Full Cure Time: 24
*Cured for servicing in 8-12 hours, maximum cure in 7 days
View Details
|
1260926 |
Pc11 1oz Epoxy Wht Paste Syrin |
2 |
8.59 |
/ EA |
010112 |
|
